diff --git a/README.md b/README.md
new file mode 100644
index 0000000..36b76be
--- /dev/null
+++ b/README.md
@@ -0,0 +1,13 @@
+# ESP32-S3-Super-Mini-Test
+
+PlatformIO template for a random "ESP32-S3 Super Mini" product based on the ESP32-S3FH4R2 I found. (4MB flash, 2MB PSRAM) Prints all system info and flashes the built-in WS2818.
+
+## Notes
+
+* On some boards you may need to replug USB / upload while holding the boot button to get it into bootloader mode / 
+  upload successfully.
+* Put your loop code in `while (true) {}` in the setup function and leave the loop function blank. Using the loop 
+  function crashes the chip. 
+* There is a regular LED and a WS2818 GRB LED on the board. Both are on GPIO 48, so use `digitalWrite`, etc. to use the 
+  regular LED and `FastLED` to use the WS2818 GRB LED.
+* Change `monitor_speed` if desired. (default is baud rate of 115200)