From 06264793a5ba1da364c3fb9c7e37299317adb21b Mon Sep 17 00:00:00 2001 From: Cyrus Yiu Date: Sun, 30 Mar 2025 03:05:28 -0400 Subject: [PATCH] README --- README.md | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 README.md diff --git a/README.md b/README.md new file mode 100644 index 0000000..36b76be --- /dev/null +++ b/README.md @@ -0,0 +1,13 @@ +# ESP32-S3-Super-Mini-Test + +PlatformIO template for a random "ESP32-S3 Super Mini" product based on the ESP32-S3FH4R2 I found. (4MB flash, 2MB PSRAM) Prints all system info and flashes the built-in WS2818. + +## Notes + +* On some boards you may need to replug USB / upload while holding the boot button to get it into bootloader mode / + upload successfully. +* Put your loop code in `while (true) {}` in the setup function and leave the loop function blank. Using the loop + function crashes the chip. +* There is a regular LED and a WS2818 GRB LED on the board. Both are on GPIO 48, so use `digitalWrite`, etc. to use the + regular LED and `FastLED` to use the WS2818 GRB LED. +* Change `monitor_speed` if desired. (default is baud rate of 115200)