Files

new file:   .gitignore
	modified:   README.md
	new file:   data/www/dashboard.html
	new file:   data/www/index.html
	new file:   data/www/wifi.html
	new file:   include/README
	new file:   lib/README
	new file:   notes.ods
	new file:   platformio.ini
	new file:   src/NoteMappings copy.h
	new file:   src/NoteMappings.h
	new file:   src/audio_input.cpp
	new file:   src/audio_input.h
	new file:   src/ble.cpp
	new file:   src/ble.h
	new file:   src/config.h
	new file:   src/esp_info.cpp
	new file:   src/esp_info.h
	new file:   src/fft_processing.cpp
	new file:   src/fft_processing.h
	new file:   src/led_control.cpp
	new file:   src/led_control.h
	new file:   src/main.cpp
	new file:   src/midi.cpp
	new file:   src/midi.h
	new file:   src/web_server.cpp
	new file:   src/web_server.h
	new file:   test/README

2025-04-12 21:23:24 +02:00

3.8 KiB

Raw Permalink Blame History

Audio2MIDI

This project is an Arduino-based application that manages WiFi connectivity, LED control, and ESP device information. It uses the WiFiManager library to handle WiFi connections with fallback to Access Point (AP) mode and a captive portal for configuration.

Features

WiFi Management: Automatically connects to saved WiFi credentials or starts an AP with a captive portal for configuration if no connection is possible.
ESP Information: Displays ESP device information such as chip ID and flash size.
LED Control: Provides functionality for controlling LEDs (e.g., cycling through colors).
Web Server: (Placeholder for potential web server functionality).

Project Structure

The project is organized as follows:

src/
├── esp_info.cpp       # Handles ESP device information
├── esp_info.h
├── index.h            # Placeholder for web server content
├── led_control.cpp    # Handles LED control logic
├── led_control.h
├── main.cpp           # Main entry point for the application
├── web_server.cpp     # Placeholder for web server functionality
├── web_server.h
├── wifi_manager.cpp   # Manages WiFi connectivity
├── wifi_manager.h

Key Components

`main.cpp`

The main entry point of the application. It initializes the WiFi manager, prints ESP information, and sets up LED control.

`wifi_manager.cpp` and `wifi_manager.h`

Manages WiFi connectivity using the WiFiManager library. It attempts to connect to saved WiFi credentials and falls back to AP mode with a captive portal if the connection fails.

`esp_info.cpp` and `esp_info.h`

Provides functions to retrieve and display ESP device information such as chip ID and flash size.

`led_control.cpp` and `led_control.h`

Handles LED control logic, such as cycling through colors or setting specific patterns.

`web_server.cpp` and `web_server.h`

(Placeholder) Intended for implementing web server functionality.

Setup and Usage

Prerequisites

Arduino IDE or PlatformIO
ESP8266 or ESP32 microcontroller
WiFiManager library installed

Installation

Clone this repository:

git clone https://github.com/your-username/audio2midi.git
cd audio2midi

Open the project in your preferred IDE (e.g., Arduino IDE or VS Code with PlatformIO).
Install the required libraries:
- WiFiManager
Configure your microcontroller board and upload the code.

Usage

Power on the ESP device.
The device will attempt to connect to saved WiFi credentials.
If no connection is possible, the device will start an AP named AudioToMIDI-AP with the password password123.
Connect to the AP and configure the WiFi credentials through the captive portal.
Once connected, the device will proceed with its functionality (e.g., LED control, ESP info display).

Customization

AP Name and Password: Modify the AP name and password in wifi_manager.cpp:
```
wm.autoConnect("AudioToMIDI-AP", "password123");
```
LED Behavior: Customize LED patterns in led_control.cpp.

Troubleshooting

If the device fails to start the AP or connect to WiFi, ensure the WiFiManager library is installed and the ESP device is properly configured.
Check the serial monitor for debug output.

License

This project is licensed under the MIT License. See the LICENSE file for details.

Acknowledgments

WiFiManager for simplifying WiFi configuration.

Visit http://[esp-ip]/list to see all files in SPIFFS Verify that you see /www/index.html and /www/dashboard.html listed If files are not listed, you need to upload them to SPIFFS using PlatformIO's "Upload Filesystem Image" task

3.8 KiB Raw Permalink Blame History