new file: include/_hal_uart_dma.c

new file:   include/_hal_uart_isr.c
	new file:   include/hal_adc.c
	new file:   include/hal_adc.h
	new file:   include/hal_aes.h
	new file:   include/hal_assert.c
	new file:   include/hal_assert.h
	new file:   include/hal_board.h
	new file:   include/hal_board_cfg.h
	new file:   include/hal_ccm.h
	new file:   include/hal_defs.h
	new file:   include/hal_dma.c
	new file:   include/hal_dma.h
	new file:   include/hal_drivers.c
	new file:   include/hal_drivers.h
	new file:   include/hal_flash.c
	new file:   include/hal_flash.h
	new file:   include/hal_key.c
	new file:   include/hal_key.h
	new file:   include/hal_lcd.c
	new file:   include/hal_lcd.h
	new file:   include/hal_led.c
	new file:   include/hal_led.h
	new file:   include/hal_mac_cfg.h
	new file:   include/hal_mcu.h
	new file:   include/hal_oad.c
	new file:   include/hal_oad.h
	new file:   include/hal_ota.c
	new file:   include/hal_ota.h
	new file:   include/hal_rpc.h
	new file:   include/hal_sleep.c
	new file:   include/hal_sleep.h
	new file:   include/hal_startup.c
	new file:   include/hal_timer.c
	new file:   include/hal_timer.h
	new file:   include/hal_types.h
	new file:   include/hal_uart.c
	new file:   include/hal_uart.h

include/hal_startup.c

@@ -0,0 +1,103 @@
+/**************************************************************************************************
+  Filename:       hal_startup.c
+  Revised:        $Date: 2010-01-28 16:31:53 -0800 (Thu, 28 Jan 2010) $
+  Revision:       $Revision: 21613 $
+
+  Description:    Contains code that needs to run before main()
+
+  Copyright 2008 Texas Instruments Incorporated. All rights reserved.
+
+  IMPORTANT: Your use of this Software is limited to those specific rights
+  granted under the terms of a software license agreement between the user
+  who downloaded the software, his/her employer (which must be your employer)
+  and Texas Instruments Incorporated (the "License").  You may not use this
+  Software unless you agree to abide by the terms of the License. The License
+  limits your use, and you acknowledge, that the Software may not be modified,
+  copied or distributed unless embedded on a Texas Instruments microcontroller
+  or used solely and exclusively in conjunction with a Texas Instruments radio
+  frequency transceiver, which is integrated into your product.  Other than for
+  the foregoing purpose, you may not use, reproduce, copy, prepare derivative
+  works of, modify, distribute, perform, display or sell this Software and/or
+  its documentation for any purpose.
+
+  YOU FURTHER ACKNOWLEDGE AND AGREE THAT THE SOFTWARE AND DOCUMENTATION ARE
+  PROVIDED <20>AS IS<49> WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
+  INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, TITLE,
+  NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
+  TEXAS INSTRUMENTS OR ITS LICENSORS BE LIABLE OR OBLIGATED UNDER CONTRACT,
+  NEGLIGENCE, STRICT LIABILITY, CONTRIBUTION, BREACH OF WARRANTY, OR OTHER
+  LEGAL EQUITABLE THEORY ANY DIRECT OR INDIRECT DAMAGES OR EXPENSES
+  INCLUDING BUT NOT LIMITED TO ANY INCIDENTAL, SPECIAL, INDIRECT, PUNITIVE
+  OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST DATA, COST OF PROCUREMENT
+  OF SUBSTITUTE GOODS, TECHNOLOGY, SERVICES, OR ANY CLAIMS BY THIRD PARTIES
+  (INCLUDING BUT NOT LIMITED TO ANY DEFENSE THEREOF), OR OTHER SIMILAR COSTS.
+
+  Should you have any questions regarding your right to use this Software,
+  contact Texas Instruments Incorporated at www.TI.com.
+**************************************************************************************************/
+
+/**************************************************************************************************
+ * INCLUDES
+ *************************************************************************************************/
+#include "hal_board.h"
+#include "hal_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#pragma language=extended
+
+//
+// Locate low_level_init in the CSTART module
+//
+#pragma location="CSTART"
+//
+// If the code model is banked, low_level_init must be declared
+// __near_func elsa a ?BRET is performed
+//
+#if (__CODE_MODEL__ == 2)
+__near_func __root char
+#else
+__root char
+#endif
+__low_level_init(void);
+
+/**************************************************************************************************
+ * @fn          __low_level_init
+ *
+ * @brief      The function __low_level_init is called by the start-up code before doing
+ *                the normal initialization of data segments. If the return value is zero,
+ *                initialization is not performed.
+ *
+ * @param       None
+ *
+ * @return      0 - don't intialize data segments / 1 - do initialization
+ **************************************************************************************************/
+#if (__CODE_MODEL__ == 2)
+__near_func __root char
+#else
+__root char
+#endif
+__low_level_init(void)
+{
+  /*==================================*/
+  /*  Initialize hardware.            */
+  /*==================================*/
+  // Map flash bank #1 into XDATA for access to "ROM mapped as data".
+  MEMCTR = (MEMCTR & 0xF8) | 0x01;
+
+  /*==================================*/
+  /* Choose if segment initialization */
+  /* should be done or not.           */
+  /* Return: 0 to omit seg_init       */
+  /*         1 to run seg_init        */
+  /*==================================*/
+  return 1;
+}
+
+#pragma language=default
+
+#ifdef __cplusplus
+}
+#endif