refactor ♻️: Implement comprehensive sensor system for environmental monitoring, including temperature, humidity, pressure, wind speed, and direction.

- This commit updates the build process to use a custom toolchain and configuration, enabling compilation of multiple project components.
- The primary goal of this commit is to provide a detailed overview and documentation for a zigbee weather station project, including firmware information and sensor component descriptions.
- Updated configuration file with new constants and definitions.
- The MAIN GOAL of these changes is to implement a comprehensive sensor system for environmental monitoring, including temperature, humidity, pressure, wind speed, and direction.
- Main goal of the changes: Define a new header file with function prototypes and external variable declarations.
- Added new functionality to initialize and read data from an anemometer sensor, introducing its necessary setup and calculation logic.
- Added header file for anemometer sensor with function prototypes.
- Initial implementation of BME280 sensor functionality.
- Added function prototype for the BME280 initialization and data reading functions.
- Initializes and configures a rain gauge sensor with GPIO interrupt setup.
- Added function prototypes to the rain gauge sensor header file.
- This commit adds a new C function to initialize and read data from a wind vane sensor.
- Updated header file with new function prototype definitions.
- This commit adds a new function `send_zigbee_data` to send various Zigbee data types.
- Added Zigbee communication header file with function prototype for sending data.

README.md

@@ -1,2 +1,43 @@
 # zigbee_weather_station
 
+firmware for CC2530
+
+zigbee weather station using sensors from WH-SP-WS02
+
+Overview of Components:
+
+-   BME280: Measures temperature, humidity, and pressure.
+-   Tipping Bucket: Measures rainfall with each tip corresponding to 0.2794 mm.
+-   Anemometer: Measures wind speed, with each tip corresponding to 1.492 mph.
+-   Wind Vane: A resistive sensor with 16 positions that can indicate wind direction.
+
+Libraries and Tools:
+-   Z-Stack (Zigbee Stack): The CC2530 uses the Z-Stack firmware for Zigbee. This provides the Zigbee protocol stack and the tools to create Zigbee devices.
+-   I2C for BME280: You'll need the I2C interface to communicate with the BME280.
+-   GPIO for Tipping Bucket, Anemometer, and Wind Vane: These sensors can be read using the GPIO pins, either as interrupts or polling.
+
+
+
+/project-folder
+├── main.c             // Main application code
+├── main.h             // Header file for main
+│
+├── zigbee_comm.c      // Zigbee communication functions
+├── zigbee_comm.h      // Header for Zigbee communication functions
+│
+├── sensors            // Directory for sensor-related files
+│   ├── bme280.c       // BME280 sensor driver
+│   ├── bme280.h       // Header for BME280 sensor
+│   ├── wind_vane.c    // Wind Vane sensor driver
+│   ├── wind_vane.h    // Header for Wind Vane sensor
+│   ├── rain_gauge.c   // Rain Gauge sensor driver
+│   ├── rain_gauge.h   // Header for Rain Gauge sensor
+│   └── anemometer.c   // Anemometer sensor driver
+│   └── anemometer.h   // Header for Anemometer sensor
+│
+├── config             // Configuration settings
+│   └── config.h       // Configuration file for settings (timing, thresholds, etc.)
+│
+└── Makefile           // Makefile for compiling the project
+│
+└── README.md (Project description and instructions)