# zigbee_weather_station

firmware for CC2530

zigbee weather station using sensors from WH-SP-WS02

Overview of Components:

-   BME280: Measures temperature, humidity, and pressure.
-   Tipping Bucket: Measures rainfall with each tip corresponding to 0.2794 mm.
-   Anemometer: Measures wind speed, with each tip corresponding to 1.492 mph.
-   Wind Vane: A resistive sensor with 16 positions that can indicate wind direction.

Libraries and Tools:
-   Z-Stack (Zigbee Stack): The CC2530 uses the Z-Stack firmware for Zigbee. This provides the Zigbee protocol stack and the tools to create Zigbee devices.
-   I2C for BME280: You'll need the I2C interface to communicate with the BME280.
-   GPIO for Tipping Bucket, Anemometer, and Wind Vane: These sensors can be read using the GPIO pins, either as interrupts or polling.



/project-folder
├── main.c             // Main application code
├── main.h             // Header file for main
│
├── zigbee_comm.c      // Zigbee communication functions
├── zigbee_comm.h      // Header for Zigbee communication functions
│
├── sensors            // Directory for sensor-related files
│   ├── bme280.c       // BME280 sensor driver
│   ├── bme280.h       // Header for BME280 sensor
│   ├── wind_vane.c    // Wind Vane sensor driver
│   ├── wind_vane.h    // Header for Wind Vane sensor
│   ├── rain_gauge.c   // Rain Gauge sensor driver
│   ├── rain_gauge.h   // Header for Rain Gauge sensor
│   └── anemometer.c   // Anemometer sensor driver
│   └── anemometer.h   // Header for Anemometer sensor
│
├── config             // Configuration settings
│   └── config.h       // Configuration file for settings (timing, thresholds, etc.)
│
└── Makefile           // Makefile for compiling the project
│
└── README.md (Project description and instructions)