name: CC2530 Zigbee Firmware Build

on:
  push:
    branches:
      - main  # Triggers the action when code is pushed to the main branch
  pull_request:
    branches:
      - main  # Triggers the action for pull requests targeting the main branch

jobs:
  build:
    runs-on: ubuntu-latest  # You can use `windows-latest` or `macos-latest` as well if your toolchain is compatible

    steps:
      - name: Checkout Code
        uses: actions/checkout@v4  # Checkout the code from your GitHub repository
        with:  
          github-server-url: ${{ vars.GIT_SERVER_URL }}

      - name: Set up toolchain (IAR or CCS)
        run: |
          # Install dependencies for IAR or CCS toolchain
          # Example: For IAR Workbench you might need to install some packages or configure environment variables.

          sudo apt-get update
          sudo apt-get install -y gcc build-essential make
          # sudo apt-get -y install gcc-msp430

          # Install MSP430 GCC toolchain using alternative method
          # Add the MSP430 tools repository and install the tools
          sudo apt-get install -y wget p7zip-full

          wget https://dr-download.ti.com/software-development/ide-configuration-compiler-or-debugger/MD-LlCjWuAbzH/9.3.1.2/msp430-gcc-9.3.1.11_linux64.tar.bz2
          tar -xjf msp430-gcc-9.3.1.11_linux64.tar.bz2 -C /tmp

          ls -alt /tmp/bin/*

          echo "export PATH=/tmp/bin:$PATH"

          # You would also install the necessary firmware building tools if they are available
          # or set up cross-compilation for ARM

      - name: Build Firmware (For IAR or CCS)
        run: |
          # Run the build command for your firmware
          # Assuming you're using IAR or CCS, you'd need to invoke the build system here.
          # For example:
          # make
          # Or use IAR's compiler directly (e.g., via command line invocation)

          # Example for make-based build system:
          make all

      - name: Check Build Results
        run: |
          if [ ! -f "build/firmware.hex" ]; then
            echo "Build failed: Firmware not found!"
            exit 1
          else
            echo "Build successful!"
            rm build/firmware.hex
          fi

      # - name: Flash Firmware to CC2530 (optional)
      #   run: |
      #     # If you have a setup to flash the firmware to a CC2530 device over USB or other methods, you can set that up here
      #     # This would require a USB device with the CC2530 or CC2530 development board connected to your machine
      #     # Example of flashing tool (modify accordingly):
      #     # python flash_tool.py build/firmware.hex
          
      #     echo "Flashing firmware would go here (not implemented)"

      # - name: Upload Firmware Artifact (optional)
      #   uses: actions/upload-artifact@v2
      #   with:
      #     name: firmware
      #     path: build/firmware.hex