Jose
e322b295f2
new file: include/OSAL_Memory.c new file: include/OSAL_Memory.h new file: include/OSAL_Timers.c new file: include/OSAL_Timers.h new file: include/comdef.h new file: include/saddr.c new file: include/saddr.h modified: main.c
68 lines
1.8 KiB
C
68 lines
1.8 KiB
C
#include "hal_types.h"
|
|
#include "hal_defs.h"
|
|
// #include "hal_gpio.h"
|
|
#include "hal_timer.h"
|
|
#include "ZComDef.h"
|
|
#include "OSAL.h"
|
|
// #include "ZStack.h"
|
|
#include "i2c.h"
|
|
// Include necessary libraries for the sensors (BME280, Wind Vane, etc.)
|
|
#include "bme280.h"
|
|
#include "wind_vane.h"
|
|
#include "rain_gauge.h"
|
|
#include "anemometer.h"
|
|
|
|
#include "zigbee_comm.h"
|
|
#include "config.h"
|
|
|
|
// Global variables to store sensor data
|
|
uint8 zcl_temp_humidity_data[6]; // For temperature, humidity, pressure
|
|
uint8 zcl_wind_data[2]; // For wind speed, wind direction
|
|
|
|
// Initialize all sensors
|
|
void init_sensors() {
|
|
BME280_init();
|
|
WindVane_init();
|
|
RainGauge_init();
|
|
Anemometer_init();
|
|
}
|
|
|
|
// Read sensor data and store it
|
|
void read_sensor_data() {
|
|
int32 temperature, humidity, pressure;
|
|
BME280_readData(&temperature, &humidity, &pressure);
|
|
|
|
// Store BME280 data
|
|
zcl_temp_humidity_data[0] = (uint8)(temperature >> 8);
|
|
zcl_temp_humidity_data[1] = (uint8)(temperature & 0xFF);
|
|
zcl_temp_humidity_data[2] = (uint8)(humidity >> 8);
|
|
zcl_temp_humidity_data[3] = (uint8)(humidity & 0xFF);
|
|
zcl_temp_humidity_data[4] = (uint8)(pressure >> 8);
|
|
zcl_temp_humidity_data[5] = (uint8)(pressure & 0xFF);
|
|
|
|
// Read and store wind data
|
|
zcl_wind_data[0] = WindVane_read(); // Wind direction
|
|
zcl_wind_data[1] = Anemometer_read(); // Wind speed
|
|
|
|
// Read rain gauge data
|
|
RainGauge_read();
|
|
}
|
|
|
|
// Main application loop
|
|
void main_loop() {
|
|
while (1) {
|
|
read_sensor_data(); // Read all sensor data
|
|
send_zigbee_data(); // Send collected data over Zigbee
|
|
|
|
osal_delay(60000); // Delay for 1 minute (60000ms)
|
|
}
|
|
}
|
|
|
|
int main() {
|
|
hal_init(); // Initialize the CC2530 hardware
|
|
init_sensors(); // Initialize all sensors
|
|
main_loop(); // Enter main loop
|
|
|
|
return 0;
|
|
}
|