Jose
9a3ec2410c
Some checks failed
CC2530 Zigbee Firmware Build / build (push) Failing after 1m13s
- The updated workflow is designed to automate the building and deployment of Zigbee firmware for a specific device.
67 lines
2.3 KiB
YAML
67 lines
2.3 KiB
YAML
name: CC2530 Zigbee Firmware Build
|
|
|
|
on:
|
|
push:
|
|
branches:
|
|
- main # Triggers the action when code is pushed to the main branch
|
|
pull_request:
|
|
branches:
|
|
- main # Triggers the action for pull requests targeting the main branch
|
|
|
|
jobs:
|
|
build:
|
|
runs-on: ubuntu-latest # You can use `windows-latest` or `macos-latest` as well if your toolchain is compatible
|
|
|
|
steps:
|
|
- name: Checkout Code
|
|
uses: actions/checkout@v4 # Checkout the code from your GitHub repository
|
|
with:
|
|
github-server-url: ${{ vars.GIT_SERVER_URL }}
|
|
|
|
- name: Set up toolchain (IAR or CCS)
|
|
run: |
|
|
# Install dependencies for IAR or CCS toolchain
|
|
# Example: For IAR Workbench you might need to install some packages or configure environment variables.
|
|
|
|
sudo apt-get update
|
|
sudo apt-get install -y gcc-arm-none-eabi build-essential
|
|
|
|
# You would also install the necessary firmware building tools if they are available
|
|
# or set up cross-compilation for ARM
|
|
|
|
- name: Build Firmware (For IAR or CCS)
|
|
run: |
|
|
# Run the build command for your firmware
|
|
# Assuming you're using IAR or CCS, you'd need to invoke the build system here.
|
|
# For example:
|
|
# make
|
|
# Or use IAR's compiler directly (e.g., via command line invocation)
|
|
|
|
# Example for make-based build system:
|
|
make all
|
|
|
|
- name: Check Build Results
|
|
run: |
|
|
if [ ! -f "build/firmware.hex" ]; then
|
|
echo "Build failed: Firmware not found!"
|
|
exit 1
|
|
else
|
|
echo "Build successful!"
|
|
rm build/firmware.hex
|
|
fi
|
|
|
|
# - name: Flash Firmware to CC2530 (optional)
|
|
# run: |
|
|
# # If you have a setup to flash the firmware to a CC2530 device over USB or other methods, you can set that up here
|
|
# # This would require a USB device with the CC2530 or CC2530 development board connected to your machine
|
|
# # Example of flashing tool (modify accordingly):
|
|
# # python flash_tool.py build/firmware.hex
|
|
|
|
# echo "Flashing firmware would go here (not implemented)"
|
|
|
|
# - name: Upload Firmware Artifact (optional)
|
|
# uses: actions/upload-artifact@v2
|
|
# with:
|
|
# name: firmware
|
|
# path: build/firmware.hex
|