feat ✨: Automate Zigbee firmware build and deployment

- The updated workflow is designed to automate the building and deployment of Zigbee firmware for a specific device.

.gitea/workflows/ci.yml

@@ -0,0 +1,66 @@
+name: CC2530 Zigbee Firmware Build
+
+on:
+  push:
+    branches:
+      - main  # Triggers the action when code is pushed to the main branch
+  pull_request:
+    branches:
+      - main  # Triggers the action for pull requests targeting the main branch
+
+jobs:
+  build:
+    runs-on: ubuntu-latest  # You can use `windows-latest` or `macos-latest` as well if your toolchain is compatible
+
+    steps:
+      - name: Checkout Code
+        uses: actions/checkout@v4  # Checkout the code from your GitHub repository
+        with:  
+          github-server-url: ${{ vars.GIT_SERVER_URL }}
+
+      - name: Set up toolchain (IAR or CCS)
+        run: |
+          # Install dependencies for IAR or CCS toolchain
+          # Example: For IAR Workbench you might need to install some packages or configure environment variables.
+
+          sudo apt-get update
+          sudo apt-get install -y gcc-arm-none-eabi build-essential
+
+          # You would also install the necessary firmware building tools if they are available
+          # or set up cross-compilation for ARM
+
+      - name: Build Firmware (For IAR or CCS)
+        run: |
+          # Run the build command for your firmware
+          # Assuming you're using IAR or CCS, you'd need to invoke the build system here.
+          # For example:
+          # make
+          # Or use IAR's compiler directly (e.g., via command line invocation)
+
+          # Example for make-based build system:
+          make all
+
+      - name: Check Build Results
+        run: |
+          if [ ! -f "build/firmware.hex" ]; then
+            echo "Build failed: Firmware not found!"
+            exit 1
+          else
+            echo "Build successful!"
+            rm build/firmware.hex
+          fi
+
+      # - name: Flash Firmware to CC2530 (optional)
+      #   run: |
+      #     # If you have a setup to flash the firmware to a CC2530 device over USB or other methods, you can set that up here
+      #     # This would require a USB device with the CC2530 or CC2530 development board connected to your machine
+      #     # Example of flashing tool (modify accordingly):
+      #     # python flash_tool.py build/firmware.hex
+          
+      #     echo "Flashing firmware would go here (not implemented)"
+
+      # - name: Upload Firmware Artifact (optional)
+      #   uses: actions/upload-artifact@v2
+      #   with:
+      #     name: firmware
+      #     path: build/firmware.hex